Commercial Wireless E-Loop Kit - Presence mode
Introducing a new concept in wireless vehicle detection. The Commercial E-Loop Kit replaces traditional wired inductive loops, saving time, money and mess while increasing reliability.
The Radar sensors can detect vehicles that are stopped above the e-loop. The added radar utilises two-way radio communication protocol for reliable operation. Once the magnetometer sensor detects an oncoming vehicle, the transceiver (Trans-200) relay will be latched and confirmation will be sent back to the e-loop.
If the magnetic field drops below the set threshold, the radar will check if a vehicle is present. If no vehicle is detected, an unlatch command is sent to the relay, and the transceiver will send a confirmation to the e-loop.
If the confirmation is missed, multiple attempts will be made to ensure A safe operation. Radar settings can be adjusted using the e-diagnostics remote.
Settings that can be changed with the Trans-200 include - Dead zone, sensor distance, sensitivity, magnetic field release level, confirmation mode.
Additional information
| Weight | 1 kg |
Installation in 3 simple steps
- Code in e-Loop.
- Secure e-Loop to the driveway.
- Calibrate e-Loop … and you’re ready. to operate in less than 15 minutes. Save many hours of installation time compared to wired loop systems.
Specifications:
- Dual sensor technology.
- Magnetic field and Radar detection.
- Quick and easy installation.
- Compact profile – only 28mm high x 220mm diameter.
- Not affected by ground movement.
- 10600 mA battery giving up to 10 years battery life.
- High security 128 bit encryption.
- Range 50 metres.
- Made of high-impact plastic (10 tonne static load limit).
