SQWCRADAR Radar Key Toilet Door Entry Lock
A heavy duty weather resistant Radar key toilet entry lock unit with LED status indicator. Comes with a Radar key (colour of key may vary)
Features:
- Very easy to operate, a simple non resistive quarter turn. Much easier than the mechanical locks.
- 2 x waterproof microswitches wired in series to maintain security.
- 316 Stainless steel escutcheon and internal parts.
- Will accept all RADAR keys without no jamming.
- Green LED and sounder when activated.
- Red & blue LED indicator to shown engaged/vacant status and aid colour blind users.
- Works with our WCPCB, which controls the mag lock, lock/open sensor and automatic door operator.
What is a RADAR Key?
RADAR Keys allow disabled people to open locked accessible toilets all over the UK. Disabled toilets are common, and certain premises are required to have them by law but they are often locked to ensure they can only be used by people who need them. This can become a problem if a member of staff is not on hand with the key when you need it. If you have mobility problems getting a key in advance is a very good idea.
- No results
(+ £3.56 per item)
Additional information
| Weight | 0.5 kg |
- Heavy duty, weatherproof external radar key entry unit
- Antimicrobial acrylic facia
- Switching red & blue LEDs to show engaged or vacant status
Solution:
-
Ensure mag lock monitoring contacts are wired into the door switch terminals on the control board.
-
Adjust the potentiometer on the timer relay to switch for 3 – 5 seconds.
-
Reduce the sensitivity of the internal sensor, especially if emergency lighting or hand dryers are nearby.
-
Re-terminate internal sensor connections.
- Consider fitting the MULTI-TIMER reset relay.
Solution:
-
Remove the two wires from the C and NO door activation terminals on the control board and join them together.
-
If the door still doesn’t open, the problem lies with the operator—contact the supplier/manufacturer.
Solution:
-
Check the override keyswitch position.
-
Ensure the break glass hasn’t been pressed
- Use a multimeter to check for voltage at the mag lock.
If voltage is present but the lock isn’t engaging, the lock is faulty.
Yes!
-
Multiple Radar keyswitches can be wired in parallel.
