AES 603-AS Wireless Audio Intercom - Architectural Stainless Model
Categories:
All Intercoms, AES Intercoms, AES Systems, Gates & Barriers, Intercom Systems, Wireless, Wireless Intercom Systems, Wireless Intercoms, Access Control
From £412.97 EX VAT
603 DECT Wireless Audio Intercom
AES digital DECT wireless audio intercom system. High quality and stylish curved architectural model, with a brushed stainless steel construction. The housing also features an illuminated push button and modern blue back lighting effect. Also available with built in illuminated keypad and hands free audio unit.
Wireless audio intercom kit includes speech panel, transmitter module, power supply, 3 metres screened CAT5 cable, handset (extra available), charging base, charger and installation manual.
Features:
- Working range of 250 metres, 400m in open field conditions
- Up to 4 handsets per system
- Intercall between handsets
- Gate/door release relay built in
- Simple install and setup
- Voicemail feature for missed callers, user can listen to message on handset
- 2 year warranty
- No results
Variation Price
£412.97
EX VAT
Additional information
| Weight | 3 kg |
There are no reviews yet.
Only logged in customers who have purchased this product may leave a review.
Speech unit and transmitter specification:
- Power supply: 12Vdc (adaptor included)
- Relay type: N.O & N.C contacts
- Relay time: Fixed 4 seconds
- Cable between speech unit and transmitter: Screened CAT5, maximum 8 metres (shorter the better)
- Speech unit IP55
- Transmitter unit IP65
- Keypad programming on the keypad, up to 1200 codes
- Wiegand output: 26 or 34 bit
Handset specification:
- Power supply: 5Vdc (adaptor included)
- Battery life: 24 hours
- Up to 4 handsets per system
- Easy to use, simple answer and end call button
- Release door from the handset at any time
Answer:
- Try re-coding the handset and transmitter per instructions.
- Check push button wiring to the transmitter with multi-meter.
- Check power cable distance from power adaptor to transmitter is less than 4 meters
Answer:
- Check cable distance between the speech unit and transmitter. Shorten this if possible.
- Check cable used between the speech unit and transmitter is screened CAT5.
- Check that the screen of the CAT5 is connected to the ground in the transmitter per wiring instructions.
Answer:
Check if the corresponding relay indicator light comes on.
- If it does, then the fault is either a power problem with excessive cable run, or wiring.
- If the relay can be heard clicking, then it is a wiring problem.
- If a click cannot be heard, then it is likely a power problem.
- If the light does not activate and the keypad emits an error tone, then the issue is likely a programming error.
Answer:
- Check that the power cable to the transmitter is within guidelines and is heavy enough gauge. Insufficient power cabling will reduce transmission power!
- Check that there are not excessive objects blocking the signal, like large dense shrubs, vehicles, foil lined wall insulation etc.
- Try to achieve line of sight between both devices.
Solution:
- Try replacing both batteries with equivalent Ni-Mh batteries firstly. It is possible to have a dead cell in a battery which can prevent both batteries from charging.
- Check for contamination or grease on the charging pins at the base of the handset (gently scratch with screwdriver or wire wool).
