MULTI-TIMER Multi Function Timer Relay

Our multi function timer relay modes include Pulse on, delay on, cycle on/off delay, delay off. Please refer to the manual to check one of the modes is suitable for your application.

• Choose from positive trigger, negative trigger, different power supply trigger, or trigger on power up.
• Easily adjust the relay open and close times, and number of cycles (where applicable).
• Set timer to 1-999 milliseconds, 1-999 seconds or 1-999 minutes.
• Simple programming with push buttons and digital display.

This item is also used with our WCKIT toilet door locking system to reset the system and unlock the door after a pre-set amount of time, preventing misuse of the facility by the public.

• Working voltage: 6-30Vdc or micro USB 5V power supply.
• Trigger signal source: high-level trigger (3.0V-24V) The signal ground and the system ground are not in the same ground to improve the anti-interference ability of the system (you can also short-circuit the common ground yourself)
• Relay output: Clean contact, 10A @ 30Vdc / 10A @ 250Vac
• Current draw: Standby: 20mA / Working: 50mA
• Sleep mode option. After enabling, if there is no operation within 5 minutes, the display will be turned off automatically. Any key to wake up.
• Turn off the relay in an emergency with the STOP button.
• With optocoupler isolation, enhanced anti-interference ability.
• All setting parameters are automatically saved after power-off.
• Dimensions: 63 x 38 x 20mm.
• 1 year warranty.
• Please note available modes may change without notice.

📄Manual

📄Fixings

WCPCB