Small high quality 868MHz receiver with a 200 code memory. 2 or 4 Channels available.
For adding a remote control facility to automatic doors, gates, barriers, rising bollards, garage doors, roller shutters, industrial doors, etc. Just power the receiver and connect the relay outputs to the open/activate terminals on the existing controller. This adds both security and ease of access, and by connecting an RX to all of your devices (e.g. gate and garage) you can then operate everything from the same remote control.
For use with our wireless touch switches and some handheld & desk mount transmitters.
2 Channel
4 Channel
No results
Variation Price
£28.35
EX VAT
Additional information
Weight
0.06 kg
Power supply: 12/24Vdc
Current consumption: 18mA standby, 60mA max
Frequency: 868.35MHz
Memory: 200 codes
Clean normally open relay contacts
Momentary or bi-stable (latching), selectable by dipswitch
Maximum relay load: 1A @ 24Vdc, 1A @ 120Vac
Transmission range: 50 metres
Dimensions: 65 x 65 x 30mm
PCB dimensions: 61 x 46 x 12mm
2 or 4 Channel options
Internal use only, must be housed in a suitable IP rated box if used outside.
If the relay in the receiver is clicking when the transmitter/touch sensor is pressed:
The system is working. Check the wiring from the receiver to the equipment. Refer to the manual of the equipment or contact the manufacturer.
If not:
Check there is power to the receiver.
Check the transmitter/touch sensor is programmed into the receiver. If you have a transmitter with more than one button, each button must be programmed individually. See also next sections.
Check the remote is compatible and looks identical to other remotes on the system.
Change the batteries, even if the LED is lighting up.
Refer to the receiver manual or follow the programming video tutorial.
If more than one remote won’t program, the issue is unlikely to be the remotes. Check there are no metal objects obstructing the receiver, extend the antenna if possible, and check its power supply.
If a new installation, test in a different location to determine if the issue is signal interference.
Change the batteries, even if the LED is lighting up.
If more than one has stopped working at the same time, check there’s power to the receiver. If you can hear the receiver relay clicking or see the red LED turning on when you press a remote, then the system is working. The issue is probably with the equipment the receiver is activating, e.g. auto door, gate, garage, etc. Contact your installer or maintenance company.
No, touch sensors program to channel 1 (A) by default. Purchase an RX-T receiver instead if you wish to configure them to different channels.
