Architrave / slimline 868MHz radio touch sensor with scratch resistant, antimicrobial acrylic label. Primarily used to activate automatic doors. Available with or without wheelchair logo. Designed to fit neatly on door architraves, posts and barriers.

Unlike mechanical push pads no physical pressure is required making them ideal for users with physical disabilities. When activated the sensor beeps and the green LEDs flashes, the sensor then transmits a wireless signal to the receiver inside the door opener, which triggers the door to open. This cable free solution makes the installation significantly quicker and easier.

The bold, clear, concise signage, LED and built in sounder give aid to people with sight and hearing impairments. We believe our sensors are modern, user friendly and the cleanest switches available on the market! They can help prevent the spread of infections and are a hygienic alternative to push pads and hospital switches.

DDA Compliant!
Choices of automatic door and toilet door switches available.
Available in a variety of styles and designs to suit the installation.
Our touch switches are reliable, attractive, modern and robust! We pride ourselves on repeat custom!
Customised signage is available, including the option to have your company name, logo, phone number & website added.
They are suitable for internal and external use.
More reliable and reasonably priced than the traditional stainless steel mechanical push pads!
Bacteria can survive on your hands for up to 3 hours and 80% of contagious diseases are transmitted through touch. Thanks to the anti-microbial & anti-bacterial touch area, the spread of germs and common viruses like flu can be stopped.

868MHz
4 x AA alkaline batteries (supplied)
Approximately 100,000 operations
Green LED & bleep on activation
Battery saving design, unit will only transmit once if hand left on
Entire label is sensitive
Reinforced nylon housing
IP65 rated
Weight - 23g
Max 50m distance between touch sensor and RX receiver
Specifically designed for architraves, posts and barriers

Our sensors offer protection against a range of bacteria including E. coli, MRSA, Salmonella and Legionella, as well as black mould growth, biofilm and fungi. Mould growth is responsible for costly redecoration cycles and respiratory complaints, especially in damp and humid environments where its prevention is otherwise difficult.

The antimicrobial additive works continuously and effectively to restrict this growth before it appears. It eradicates the bacteria which cause contamination and infection, as well as those responsible for odours and staining. The antimicrobial effect also protects the product against degradation, extending its use!

Company name & logo can be printed on the label (Contact us for further information)

📄Datasheet

📄Manual

▶️Programming tutorial (RX-2 & RX-2-5A receivers)

◾ You must locate & access the receiver to program a touch sensor

Compatible receivers are: RX-2, RX-4, RX-2-5A, RX-MINI-1, RX-MINI-1-PLUS, RX-T
The receiver will be wired in to whatever it is switching. If switching an automatic door, it is likely to be inside the operator. You may need to trace some wires back to it.
Please note the receiver may have been taken out of its housing.

◾ Touch sensor has stopped working or won’t program

Solution:

Change the batteries.
Follow the programming video tutorial.
Check there are no metal objects obstructing the receiver, check its power supply by making sure there’s correct voltage and that the output isn’t powering too many things, and extend the antenna.
Test in a different location to determine if signal interference is the issue.
If it’s determined to be interference, hardwiring is the best option.

◾ Touch sensor is intermittent

Solution:

Change the batteries.
Check there are no metal objects obstructing the receiver, check its power supply by making sure there’s correct voltage and that the output isn’t powering too many things, and extend the antenna.
Test in a different location to determine if signal interference is the issue.
If it’s determined to be interference, hardwiring is the best option.

◾ The automatic door isn’t opening when the touch sensor is activated

Solution:

If the receiver relay is clicking or the red LED is turning on (depending on receiver model) when the touch sensor is activated:

The system is working. Check the wiring from the receiver to the auto door operator. Check the operator is in automatic mode. Refer to the manual of the auto door operator or contact the manufacturer.

If not: