FPN Fingerprint Access Control Reader with Proximity
SKU:
FPN
Categories:
Door & Gate Entry Keypads, Proximity & Biometrics, Access Control, Biometric Readers, Fingerprint Readers, Keypads, Proximity & Biometrics, Proximity Fob & Card Readers, Proximity Readers, Gates & Barriers
£106.60 EX VAT
Our fingerprint access control is a waterproof metal standalone or Wiegand output fingerprint & proximity reader.
Suitable for access control on doors, gates, barriers and roller shutters, in both domestic and commercial settings. It's narrow shape makes it ideal for door frames.
PFOB-G + (Price £0.88 EX VAT per item)
PFOB-IP + (Price £0.93 EX VAT per item)
PCARD + (Price £1.24 EX VAT per item)
Additional information
| Weight | 0.5 kg |
- Operating voltage 12-18Vdc
- Optical fingerprint module
- Waterproof, conforms to IP66
- One relay output
- Strong anti-vandal zinc alloy powder coated housing
- Full programming from the remote control
- Admin add/delete cards for quick programming of users
- 1000 users
- Card frequency 125KHz EM
- Wiegand 26-37 bits output
- Tri colour LED status display
- Integrated alarm and buzzer output
- Pulse (adjustable) or toggle mode
- 2 devices can be interlocked for 2 doors
- Built in light dependent resistor (LDR) for anti-tamper
- Pre-wired 1 metre cable
- Dimensions: 128 x 48 x 26mm
- Perform a factory reset. Master code will be reset to default. (123456)
- How to: Power off, press and hold the exit button whilst powering up the unit. There will be 2 beeps, release the exit button, the LED turns yellow. Then read any two EM 125KHz cards, the LED will turn red. The first card read is the master add card, the second card read is the master delete card. User data is unaffected.
- Any two EM cards can be programmed as master cards. Perform a factory reset: Power off, press and hold the exit button whilst powering up the unit. There will be 2 beeps, release the exit button, the LED turns yellow. Then read any two EM 125KHz cards, the LED will turn red. The first card read is the master add card, the second card read is the master delete card. User data is unaffected.
- Check your cards or fobs are the correct type & frequency for the reader. They must be 125KHz EM.
- Check the fingerprint has been programmed correctly.
- Cuts and dirt on fingertips can affect the readers ability to read fingerprints.
- User ID is already taken, please try a different one.
- When the device was installed, an issue record should have been kept. This may be on the last page of the supplied manual or kept digitally. Refer to the issue record and see page 8 of the manual.
- If no issue record was kept, you may need to delete all users and re-add them.
- This can often be caused by a faulty power supply or not enough current. Fit a new transformer.
- Double check all cabling and connections. Take off the wall and connect directly to the power supply to rule out any cabling issues or short circuits.
PFOB-G, PFOB-IP, PCARD
