A versatile and cost-effective remote control receiver kit, supplied with 1 x 868 MHz receiver and 2 x 868 MHz transmitters, available in a choice of plastic or metal styles.

This kit is an ideal budget solution for adding remote control functionality to a wide range of automation systems.

Key Features

Complete kit: 1 receiver + 2 transmitters
868 MHz frequency for reliable and secure communication
Available with 1, 2, or 4 button transmitters
Choice of plastic or durable metal remote styles
Simple installation – just power the receiver and connect relay outputs

Applications

Suitable for controlling:

Automatic doors
Gates
Barriers
Rising bollards
Garage doors
Roller shutters
Industrial doors

By installing receivers on multiple systems (e.g. gate and garage), you can operate everything using a single remote control.

Receiver Options

1 & 2 button remotes supplied with RX-2 (2 channel receiver)
4 button remotes supplied with RX-4 (4 channel receiver)

2 channel or 4 channels, 200 code 868MHz receiver with N.O contacts
12/24Vdc operating voltage
Impulse or bi-stable option selectable by dip switch
Comes with 2 durable transmitters
Receiver dimensions: 67 x 67 x 30mm
Up to 50 metre range
Comes with batteries and instructions

📄Manual

▶Programming tutorial

🔹Auto doors:

▪ The equipment (auto door operator, gate panel, etc) the receiver is wired into isn’t activating

Solution:

If the relay in the receiver is clicking when the transmitter is pressed:

The system is working. Check the wiring from the receiver to the equipment. Refer to the manual of the equipment or contact the manufacturer.

If the relay in the receiver NOT is clicking when the transmitter is pressed:

Check the transmitter programmed the receiver. If you have a transmitter with more than one button, each button must be programmed individually. See also previous sections.

▪ Remote won’t program

Solution:

Check the remote is compatible and looks identical to other remotes on the system.
Change the batteries, even if the LED is lighting up.
Refer to the receiver manual or follow the programming video tutorial.
If more than one remote won’t program, the issue is unlikely to be the remotes. Check there are no metal objects obstructing the receiver, extend the antenna if possible, and check its power supply.
If a new installation, test in a different location to determine if the issue is signal interference.

▪ Remote has stopped working / intermittent

Solution:

Change the batteries, even if the LED is lighting up.
If more than one remote has stopped working at the same time, check there’s power to the receiver. If you can hear the receiver relay clicking or see the red LED turning on when you press a remote, then the system is working. The issue is probably with the equipment the receiver is activating, e.g. auto door, gate, garage, etc. Contact your installer or maintenance company.

Touch sensors:

All wireless radio touch sensors

Remote controls:

CFOB, FOB1-M, FOB2-M, FOB2-MS, FOB4-M, FOB4-MS, DDA1, DDA2, AFORK

Antennas:

ANT868, FLAT868