





RX-MINI-1-PLUS Mini 868 MHz Receiver
Ideal for tight spaces, the RX-MINI-1-PLUS is a powerful 868 MHz receiver designed to fit neatly inside automatic door operators. Despite its small size, it offers dependable performance with clean contact outputs (Common & Normally Open), allowing seamless activation via our wireless touch sensors or remotes. It also holds a 40 code memory.
To simplify installation, each unit includes long connection leads, giving you the freedom to position the PCB exactly where you need it. An adhesive backing ensures secure mounting, even in tight or awkward spaces.
Additional information
Weight | 0.06 kg |
Dimensions | 3.8 × 2 × 0.4 mm |
- 12-24Vdc
- Common and Normally open clean contacts
- 868MHz radio
- 40 code memory
- Dimensions - 38 x 22 x 4mm
- Easy to program
- 1 Year warranty
Answer:
If the red LED in the receiver turning when the transmitter/touch sensor is pressed:
- The system is working. Check the wiring from the receiver to the operator and that the operator is in automatic mode. Refer to the manual of the equipment or contact the manufacturer.
If not:
- Check there is power to the receiver.
- Check the transmitter/touch sensor is programmed into the receiver. If you have a transmitter with more than one button, each button must be programmed individually. See also next sections.
Solution:
- Check the remote is compatible and looks identical to other remotes on the system.
- Change the batteries, even if the LED is lighting up.
- Refer to the receiver manual.
- If more than one remote won’t program, the issue is unlikely to be the remotes. Check there are no metal objects obstructing the receiver, extend the antenna if possible, and check its power supply.
- If a new installation, test in a different location to determine if the issue is signal interference.
Solution:
- Change the batteries, even if the LED is lighting up.
- If more than one has stopped working at the same time, check there’s power to the receiver. If you can hear the receiver relay clicking or see the red LED turning on when you press a remote, then the system is working. The issue is probably with the equipment the receiver is activating, e.g. auto door, gate, garage, etc. Contact your installer or maintenance company.