














KPS Waterproof Digital Keypad with Proximity 12-28Vac/dc
SKU:
KPS
Categories:
Keypads, Access Control, Door & Gate Entry Keypads, Proximity & Biometrics, Keypads, Keypads, Proximity & Biometrics, Online Access Control Management System - IPNET Network Access Control, Proximity Readers, Readers & Keypads, Gates & Barriers
£53.61 EX VAT
External waterproof digital keypad with proximity reader, standalone or Wiegand output. Unlike some external keypads no rain shield is needed!
This stylish, reliable and durable unit is perfect for providing low cost access control at doors, gate, barriers and roller shutters.


PFOB-G + (Price £0.88 EX VAT per item)


PFOB-IP + (Price £0.93 EX VAT per item)


PCARD + (Price £1.24 EX VAT per item)
Additional information
Weight | 0.550 kg |
Dimensions | 114.5 × 75 × 22 mm |
- Operating voltage 12-28Vac/dc
- Waterproof, conforms to IP66
- One relay output
- Strong anti-vandal zinc alloy powder coated housing
- Full programming from the keypad
- Admin add/delete cards for quick programming of card users
- 1000 users, supports card, PIN, or card + PIN
- Card frequency 125KHz EM
- PIN length 4-6 digits
- Backlit keys
- Wiegand 26-37 bits input & output
- Tri colour LED status display
- Integrated alarm and buzzer output
- Pulse (adjustable) or toggle mode
- User data can be transferred to other units
- 2 devices can be interlocked for 2 doors
- Built in light dependent resistor (LDR) for anti-tamper
- Pre-wired 1 metre cable
- Dimensions: 114.5 x 75 x 22mm
- Perform a factory reset. Master code will be reset to default. (123456)
- How to: Power off, press and hold the exit button whilst powering up the unit. There will be 2 beeps, release the exit button, the LED turns yellow. Then read any two EM 125KHz cards, the LED will turn red. The first
card read is the master add card, the second card read is the master delete card. User data is unaffected.
- Any two 125KHz EM cards can be programmed as master cards.
- Perform a factory reset: Power off, press and hold the exit button whilst powering up the unit. There will be 2 beeps, release the exit button, the LED turns yellow. Then read any two EM 125KHz cards, the LED will turn red. The first card read is the master add card, the second card read is the master delete card. User data is unaffected.
- Check your cards or fobs are the correct type & frequency for the reader. They must be 125KHz EM.
- User ID is already taken, please try a different one.
- When the device was installed, an issue record should have been kept. This may be on the last page of the supplied manual or kept digitally. Refer to the issue record and see page 8 of the manual.
- If no issue record was kept, you may need to delete all users and re-add them.
- This can often be caused by a faulty power supply or not enough current. Fit a new transformer.
- Double check all cabling and connections. Take off the wall and power directly to the power supply to rule out any cabling issues or short circuits.