RX-2-5A 868MHz Receiver with 5 amp relays
SKU:
RX-2-5A
Categories:
Quantek Systems, Wireless Controls, Wireless Controls, Radio Remote Control Systems, Automatic Doors, Gates & Barriers
£29.38 EX VAT
Small 868MHz receiver with 5 amp relays. Can be used to switch anything with a current draw up to 5 Amps, such as lighting, water features etc.
Compatible with our wireless proximity sensors and remote controls.
Additional information
| Weight | 0.06 kg |
- Power supply: 12/24Vdc
- Power consumption: 18mA standby, 60mA max
- Frequency: 868.35MHz
- Memory: 200 codes
- 2 channels
- Relay contacts: Normally open contacts, momentary or bi-stable (latching) selectable by dipswitch
- Relay contact rating: 5A @ 28Vdc/230Vac
- Transmission range: 50 metres
- Dimensions: 65 x 65 x 30mm
- PCB dimensions: 61 x 46 x 17mm
- Internal use only, must be housed in a suitable IP rated box if used outside.
If the relay in the receiver is clicking when the transmitter/touch sensor is pressed:
- The system is working. Check the wiring from the receiver to the equipment. Refer to the manual of the equipment or contact the manufacturer.
If not:
- Check there is power to the receiver.
- Check the transmitter/touch sensor is programmed into the receiver. If you have a transmitter with more than one button, each button must be programmed individually. See also next sections.
- Check the remote is compatible and looks identical to other remotes on the system.
- Change the batteries, even if the LED is lighting up.
- Refer to the receiver manual or follow the programming video tutorial.
- If more than one remote won’t program, the issue is unlikely to be the remotes. Check there are no metal objects obstructing the receiver, extend the antenna if possible, and check its power supply.
- If a new installation, test in a different location to determine if the issue is signal interference.
- Change the batteries, even if the LED is lighting up.
- If more than one has stopped working at the same time, check there’s power to the receiver. If you can hear the receiver relay clicking or see the red LED turning on when you press a remote, then the system is working. The issue is probably with the equipment the receiver is activating, e.g. auto door, gate, garage, etc. Contact your installer or maintenance company.
