Name: SQTXFOOT Square Wireless Foot Sensor
SKU: SQTXFOOT
Price: 79.71 GBP
Availability: InStock

Our wireless foot sensor offers contactless functionality with a tough, antimicrobial acrylic label that’s scratch-resistant and washable. A hygienic alternative to door kick switches.

The sensors have an activation range of up to 20mm making them touch free. If touched, the entire label is protected by an additive which kills 99.9% of germs.

It also has a battery saving design, as it will only transmit once if foot left on. Our sensors offer protection against a range of bacteria including E. coli, MRSA, Salmonella and Legionella, as well as black mould growth, biofilm and fungi. Mould growth is responsible for costly redecoration cycles and respiratory complaints, especially in damp and humid environments where its prevention is otherwise difficult.

It works continuously and effectively to restrict this growth before it appears. It eradicates the bacteria which cause contamination and infection, as well as those responsible for odours and staining. The antimicrobial effect also protects the product against degradation, extending its use!

Key Features:

DDA Compliant square wireless kick switch!
Our sensors are reliable, attractive, modern and robust! We pride ourselves on repeat custom!
Customised signage is available, including the option to have your company name and logo added.
They are suitable for internal and external use (except single gang).
More reliable and reasonably priced than the traditional stainless steel mechanical pads!
Our no touch switches stop germs from spreading as bacteria can survive on your hands for up to 3 hours and 80% of contagious diseases are transmitted by touch!

868MHz
4 x AA alkaline batteries (supplied)
Approximately 60,000 operations
Green LED & bleep on activation
Battery saving design, unit will only transmit once if foot is left on
75mm round activation area
Approximately 15-20mm activation range (Touch free)
Reinforced nylon housing
IP65 rated
Max 50m distance between touch sensor and RX receiver

Company name & logo can be printed on the label (Contact us for further information)

📄SQUARE DATASHEET

📄Manual

▶Programming tutorial (RX-2 & RX-2-5A receivers)

▪ You must locate & access the receiver to program a touch sensor

Compatible receivers are: RX-2, RX-4, RX-2-5A, RX-MINI-1, RX-MINI-1-PLUS, RX-T
The receiver will be wired in to whatever it is switching. If switching an automatic door, it is likely to be inside the operator. You may need to trace some wires back to it.
Please note the receiver may have been taken out of its housing.

▪ Touch sensor has stopped working or won’t program

Solution:

Change the batteries.
Follow the programming video tutorial.
Check there are no metal objects obstructing the receiver, check its power supply by making sure there’s correct voltage and that the output isn’t powering too many things, and extend the antenna if possible.
Test in a different location to determine if signal interference is the issue.
If it’s determined to be interference, hardwiring is the best option.

▪ Touch sensor is intermittent

Solution:

Change the batteries.
Check there are no metal objects obstructing the receiver, check its power supply by making sure there’s correct voltage and that the output isn’t powering too many things, and extend the antenna if possible.
Test in a different location to determine if signal interference is the issue.
If it’s determined to be interference, hardwiring is the best option.

▪ The automatic door isn’t opening when the touch sensor is activated

Solution:

If the receiver relay is clicking or the red LED is turning on (depending on receiver model) when the touch sensor is activated:

The system is working. Check the wiring from the receiver to the auto door operator. Check the operator is in automatic mode. Refer to the manual of the auto door operator or contact the manufacturer.

If not: