Our architrave or jamb touch sensor is a compact, touch free solution ideal for activating automatic doors, access control systems, door entry units, and other switching applications. It features a scratch-resistant faux stainless steel acrylic label marked “Touch to Open” and is protected by an antimicrobial additive that kills 99.9% of germs.

Slim enough to fit neatly on architraves or narrow door frames, this sensor is designed with accessibility and hygiene in mind. It requires no physical pressure to operate, making it suitable for people with limited mobility. The clear signage and audible beep also support users with sight or hearing impairments.

Why chose our door sensors?

DDA Compliant. Supports accessible building design
Ideal for automatic door and toilet door applications.
Available in a variety of styles and designs to suit the installation.
Our sensors are reliable, attractive, modern and robust! We pride ourselves on repeat custom!
Customisable labels available – including the option to add your company name or logo
Suitable for internal and external use (except single gang).
More cost effective and dependable than traditional stainless steel push pads
Our no touch switches stop germs from spreading as bacteria can survive on your hands for up to 3 hours and 80% of contagious diseases are transmitted by touch!

To discuss this product in more detail, or to explore bespoke labels or system options, please contact us. Our team will be happy to assist with technical guidance, custom requirements, or project specifications.

DDA Compliant Jamb Sensor
868MHz
4 x AA alkaline batteries (supplied)
Approximately 100,000 operations
Green LED & bleep on activation
Battery saving design, unit will only transmit once if hand left on
Entire label is touch sensitive
Reinforced nylon housing
IP65 rated
Max 50m distance between touch sensor and RX receiver
Specifically designed for architraves, posts and barriers
Company name & logo can be printed on the label (Contact us for further information)

📄Datasheet

📄Manual

▶Programming tutorial (RX-2 & RX-2-5A receivers)

▪ You must locate & access the receiver to program a touch sensor

Compatible receivers are: RX-2, RX-4, RX-2-5A, RX-MINI-1, RX-MINI-1-PLUS, RX-T
The receiver will be wired in to whatever it is switching. If switching an automatic door, it is likely to be inside the operator. You may need to trace some wires back to it.
Please note the receiver may have been taken out of its housing.

▪ Touch sensor has stopped working or won’t program

✅ Solution:

Change the batteries.
Follow the programming video tutorial.
Check there are no metal objects obstructing the receiver, check its power supply by making sure there’s correct voltage and that the output isn’t powering too many things, and extend the antenna if possible.
Test in a different location to determine if signal interference is the issue.
If it’s determined to be interference, hardwiring is the best option.

▪ Touch sensor is intermittent

✅ Solution:

Change the batteries.
Check there are no metal objects obstructing the receiver, check its power supply by making sure there’s correct voltage and that the output isn’t powering too many things, and extend the antenna if possible.
Test in a different location to determine if signal interference is the issue.
If it’s determined to be interference, hardwiring is the best option.

▪ The automatic door isn’t opening when the touch sensor is activated

✅ Solution:

If the receiver relay is clicking or the red LED is turning on (depending on receiver model) when the touch sensor is activated:

The system is working. Check the wiring from the receiver to the auto door operator. Check the operator is in automatic mode. Refer to the manual of the auto door operator or contact the manufacturer.

If not: