Real Time Management System HONOADOOR JCM TECHNOLOGIES Remote Logging System
Honoadoor internal 1
Real Time Management System HONOADOOR JCM TECHNOLOGIES Remote Logging System
Honoadoor internal 1

HONOADOOR Connected Receiver for Real Time Management of Transmitters

£137.06 EX VAT

A 868MHz receiver with Bluetooth, WIFI & GSM/LTE(4G) connectivity, allows remote real time management of transmitters/remotes.

The Honodoor connects to the internet via WiFi or SIM card (10 years data included), allowing you to add & delete transmitters anywhere and instantly through the CloudAssistant web portal by JCM (license required). You can also view the event log, see whether the door is open or closed, activate the relays and set access groups & schedules, all from the comfort of your office without needing to visit site.

The initial setup is also done in your office. Hundreds of remotes can be added in seconds thanks to sequential programming. Each transmitter has a unique number and a name & other details can be assigned to each transmitter. This makes installation easy as no on site programming is required, just power the receiver and wire the relay outputs - job done!

The transmitters use high security rolling code and cannot be cloned.

These receivers are ideally suited for car park access control.

MUVPRO2 Programmable Remote
  • No results

Additional information

Weight 0.65 kg
  • WIFI / GSM&LTE Module: The equipment has a WIFI / GSM&LTE communication module for connection to the Internet. A SIM Card with 10 years of data is included.
  • Power supply: The equipment is powered with a 110Vac to 230Vac voltage. 500mA protective fuse.
  • Relay Output: The equipment has 2 adjustable open or closed contact relay outputs. These outputs can be programmed to be activated with different fob channels through cloudAssistant. Moreover, these relays can be remotely activated in real time with the cloudAssistant.
  • Inputs: The equipment has 2 inputs to connect 2 limit switches to monitor the door’s status (Open/Closed).
  • 868MHz MOTION receiver module: The equipment has an 868MHz MOTION receiver module to receive from fobs at a range of up to 100 metres.
  • Users: Up to 5000 users managed with CloudAssistant.
  • Events: Up to 5000 events may be viewed through CloudAssistant.
  • Set groups and access schedules.
  • Statistics and information on use: You may use cloudAssistant to view a daily graph of the number of relay activations, accepted and rejected users, open-door and closed-door events, data consumption, and more.
  • Light-up signals: The equipment has three LED indicators: “ST”, “NW”, and “IN” to indicate the cloudAssistant connection status.
  • Antipassback
  • IP54 (with cable gland IP65)
  • Operating temperature -20ºC / +70ºC
  • Dimensions: 140 x 220 x 55mm

The ASSISTANT programmer is not required for Honoadoor, all that is required is a CloudAssistant license. (Programmer is required if managing other receivers, e.g BASE500).