GO PRO 4 button remotes offer all of the advantages of the GO transmitters but with the added value of being compatible with Assistant & Cloud Assistant software which allows you to setup installations from the comfort of your office and manage them remotely, giving you convenience & absolute control over transmitters.

If you are ordering replacements of this transmitter, it is important to note the following:

Identify your remote type/model by checking the serial number on the back of an existing remote.
- The GOPRO4 has 13 digits in total.
- The GO4 has a 7 digit serial number.
The last 3 digits of the serial number indicate the coding.
- 040 is Quantek coded.
- 003 is JCM coded.
- Please make sure you select the correct option.
- If the last 3 digits are neither of the above, or you are unsure, please email a picture of the serial number to [email protected] and we will advise.
If there is a company logo printed anywhere on your existing remotes, please contact that company directly for replacements. Remotes ordered from us will not work.
Receivers on communal gates for example can sometimes be securely managed by the installer or property/building managers. If you believe this to be the case please contact the company directly as you will be unable to program the remotes yourself.

High security rolling code 868.35MHz
4 channel transmitter
Nominal range: 100 m
Power supply: 1 x 3Vdc CR2032 type
Consumption: 12mA
Battery lasts for approximately 2 years
Light operating indicator for low battery and signal transmission
High security rolling code, 19 trillion combinations, cannot be cloned
Laser-marked serial number
Operating temperature –20ºC a + 55ºC
Size: 62 x 33 x 11mm
Option to add company logo and unique code to ensure all future sales, please call for details

📄Programming instructions

📄Compatibility Checker

▪ Remote has stopped working

✅ Solution:

Change the batteries, even if the LED is lighting up.
If more than one remote has stopped working at the same time, check there’s power to the receiver. If you can hear the receiver relay clicking when you press a remote, then the system is working. The issue is probably with the equipment the receiver is activating, e.g. auto door, gate, garage, etc. Contact your installer or maintenance company.

▪ Remote won’t program

✅ Solution:

Check that the new remote is compatible. Compare the serial number of a working remote against the new one. Click here for more information.
If the remote is compatible, follow the radio prog video.
If this doesn’t work, identify the receiver or control panel and refer to their instructions.
If you have a PRO remote, it is possible that the receiver is managed by an installer or management company, especially on communal gates for example. Contact the company directly as you will not be able to program the remote yourself.

▪ Remote is intermittent

✅ Solution:

Change the battery.
Ensure the receiver is unobstructed by metal objects.
Purchase an antenna for the receiver (ANT868 or FLAT868).

▪ 7 beeps from the receiver when trying to program remotes

✅ Answer:

The memory is full. Please upgrade or add another receiver.
If some remotes have been lost or not in use, you can reset the receiver and re-program the ones still in use.