Birkdale Replacement Remote Dead Man Remote Control
Birkdale Replacement Remote Dead Man Remote Control

MUV2-HP 2 Channel Dead Man Remote Control

£24.70 EX VAT

JCM Technologies 868 MHz 2 button dead man remote control. Allows the user to effortlessly and remotely open and close their garage door or roller shutter from a range of up to 100 metres when paired with a compatible control panel.

If you are ordering replacements of this transmitter, it is important to note the following:

  • This remote looks identical to the MUV PRO2 and MUV2, but is not compatible. The MUVPRO2 has a 13 digit serial number engraved on the back and the MUV2 has a 7 digit serial number. The MUV2-HP has a 7 digit serial number followed by the letter D.
  • Please also check that the last 3 digits of the serial number are 040. If there aren't, please don't order, call us instead and we will advise.
  • If there is a company logo printed anywhere on your existing remotes, please contact that company directly for replacements. Remotes ordered from us will not work.

Additional information

Weight 0.050 kg
Dimensions 66 × 35 × 15 mm
  • High security rolling code 868.35MHz
  • 2 channel transmitter
  • Nominal range: Dependant upon setting in the control panel
  • Power supply: 1 x 3Vdc CR2032 type
  • Consumption: 12mA
  • Light operating indicator for low battery and signal transmission
  • High security rolling code, 19 trillion combinations, cannot be cloned
  • Laser-marked serial number
  • Operating temperature –20ºC a + 55ºC
  • Size: 66 x 35 x 15mm
  • Option to add company logo and unique code to ensure all future sales, please call for details.

Programming method is dependant on the control panel you have. Control panel part number should be displayed on a sticker on the left hand side of the panel.

📄Programming Instructions (all panels except KEEROLL) 

📄Keeroll programming instructions

Programming method is dependant on the control panel you have. Control panel part number should be displayed on a sticker on the left hand side of the panel.

â–¶All control panels except KEEROLL programming

â–¶KEEROLL programming

Solution:

  1. Change the batteries, even if the LED is lighting up.
  2. If more than one remote has stopped working at the same time, check there’s power to the control panel.

Answer:

  1. Check that the new remote is compatible. Compare the serial number of a working remote against the new one. Click here for more information.
  2. If the remote is compatible, follow the programming video for your panel. Or refer to the control panel manual.

ROLLER868, M8, ML8, KEEROLL, DMR-IND