PC180-B Battery Powered Infrared Photocell

The PC180B comprises a pair of photocells, a transmitter and a receiver, these are installed either side of the door or gate opening, creating an infra-red beam. If the beam is broken the door or gate will not operate or if it is moving it will stop or stop and reverse, dependent upon the control unit.

The transmitter is battery powered and has a normally closed contact input for connection of a safety edge, when the safety edge is activated the photocell receiver operates in the same way as if the infra-red beam was broken. The photocells are normally positioned either side of the opening at a height of about 300mm

• Receiver power supply 12 or 24Vac/dc
• Transmitter power supply 3V alkaline battery pack (2 x AAA)
• Output Normally open (NO) or normally close (NC) relay contacts
• Relay rating 1A @ 24Vac/dc
• Range Up to 20 metres
• Temperature -20 to +60⁰C
• Protection IP55

• Manual

• RC1000-MS
• RC2000
• ROLLER868
• M8
• ML8
• KEEROLL RB3
• KEEROLL RS3
• i20
• Or any 3rd party control panel with N.C photocell inputs.