When activated, the switch transmits to the receiver inside the door opener. The receiver then switches its relay which triggers the door to open. No wires are needed between the sensor and the operator, significantly reducing installation time.

Our virtual touchless door sensor range have an activation range of up to 15mm making them touch free and ideal for users with physical disabilities. When activated the sensor beeps and the green LEDs flashes. The bold, concise signage, LED and built in sounder give aid to people with sight and hearing impairments.

We believe our touchless door sensors are modern, user friendly and the cleanest switches available on the market. They can help prevent the spread of infections and are a hygienic alternative to push pads and hospital switches.

Key Features:

DDA Compliant!
Choices of automatic door and toilet door switches available.
Available in a variety of styles and designs to suit the installation.
Our sensors are reliable, attractive, modern and robust! We pride ourselves on repeat custom!
The hand and door symbol graphics are universally understood, no language barrier or confusion.
Customised signage is available, including the option to have your company name and logo added.
They are suitable for internal and external use (except single gang).
More reliable and reasonably priced than the traditional stainless steel mechanical push pads!
Bacteria can survive on your hands for up to 3 hours and 80% of contagious diseases are transmitted by touch. Our no touch switches stop these germs from spreading!

DDA Compliant
Scratch resistant anti microbial acrylic label. Supplied with screw covers for aesthetic purposes.
868MHz
4 x AAA alkaline batteries (supplied)
Approximately 100,000 operations
Green LED & bleep on activation
Battery saving design, unit will only transmit once if hand left on
62 x 48mm activation area
Approximately 15-20mm activation range (Touch free)
Reinforced nylon housing
Internal use only, IP52
Max 50m distance between touch sensor and RX receiver

Our sensors offer protection against a range of bacteria including E. coli, MRSA, Salmonella and Legionella, as well as black mould growth, biofilm and fungi. Mould growth is responsible for costly redecoration cycles and respiratory complaints, especially in damp and humid environments where its prevention is otherwise difficult. It works continuously and effectively to restrict this growth before it appears. It eradicates the bacteria which cause contamination and infection, as well as those responsible for odours and staining. The antimicrobial effect also protects the product against degradation, extending its use!

Company name & logo can be printed on the label (Contact us for further information)

📄Datasheet

📄Manual

▶Programming tutorial (RX-2 & RX-2-5A receivers)

Laboratories
Cleans Rooms
Pharmaceutical
Public Toilets
Food Processing
Restaurants
Doctors Surgeries
Hospitals & Clinics
Mortuaries
Industrial Environments
Retail and Commercial Premises

▪ You must locate & access the receiver to program a touch sensor

Compatible receivers are: RX-2, RX-4, RX-2-5A, RX-MINI-1, RX-MINI-1-PLUS, RX-T
The receiver will be wired in to whatever it is switching. If switching an automatic door, it is likely to be inside the operator. You may need to trace some wires back to it.
Please note the receiver may have been taken out of its housing.

▪ Touch sensor has stopped working or won’t program

Solution:

Change the batteries.
Follow the programming video tutorial.
Check there are no metal objects obstructing the receiver, check its power supply by making sure there’s correct voltage and that the output isn’t powering too many things, and extend the antenna if possible.
Test in a different location to determine if signal interference is the issue.
If it’s determined to be interference, hardwiring is the best option.

▪ Touch sensor is intermittent

Solution:

Change the batteries.
Check there are no metal objects obstructing the receiver, check its power supply by making sure there’s correct voltage and that the output isn’t powering too many things, and extend the antenna if possible.
Test in a different location to determine if signal interference is the issue.
If it’s determined to be interference, hardwiring is the best option.

▪ The automatic door isn’t opening when the touch sensor is activated

Solution:

If the receiver relay is clicking or the red LED is turning on (depending on receiver model) when the touch sensor is activated:

The system is working. Check the wiring from the receiver to the auto door operator. Check the operator is in automatic mode. Refer to the manual of the auto door operator or contact the manufacturer.

If not: