Miniature Receiver
base mini receiver
base mini and transmitters
Miniature Receiver
base mini receiver
base mini and transmitters

BASE-MINI 1 Channel Mini Receiver

£44.77 EX VAT

Long range radio receiver for adding a remote control facility to automated gates, barriers, rising bollards, garage doors etc.

It's small size makes it ideal for situations where space is an issue. Perfect for installation inside automatic door operators and for use with our hands free system.

 


Additional information

Weight 0.15 kg
Dimensions 64 × 48 × 22 mm

There are no reviews yet.
Only logged in customers who have purchased this product may leave a review.
  • 868.35MHz miniature receiver
  • Power supply: 12/24Vac/dc
  • Memory: 500 codes (transmitters). If using, the PCB can plug directly into the ASSISTANT programming and management tool
  • Coding method: High security rolling code
  • Relay contacts: 1 channel, normally open momentary relay contacts
  • Operating temperature: -20°C to +55°C
  • Protective plastic case
  • Program additional transmitters from already programmed ones, without having to access the receiver (except when managed with Assistant)
  • Dimensions: 65 x48 x 23mm
  1. Check that the remotes are compatible. They must be Quantek coded remotes to work with this receiver. Check the serial numbers on the remotes. Click here for more information.
  2. If the remotes are compatible, follow the programming video, or refer to the receiver manual.

If issue persists, power down the receiver and power it back up. If you hear 2 beeps, the receiver has an installer code.

  • Contact the original installer for new remotes.
  • Purchase another receiver and remotes without installer code and wire it in parallel.
  • The memory is full. Please upgrade or add another receiver.
  • If some remotes have been lost or not in use, you can reset the receiver and re-program the ones still in use.
  • If the receiver relay is clicking and the red LED is turning on when the remote is pressed, the system is working properly. Check the wiring from the receiver to the equipment. Refer to the equipment manual or contact the manufacturer.
  • If the relay isn’t clicking, check the remote is compatible and is programmed.
  • The receiver is securely managed by the installer or management company. Contact the company, or purchase another receiver and wire it in parallel.

Standard transmitters: GO-MINI, GO2, GO4, MUV2, MUV4

PRO transmitters: GOPRO-MINI, GOPRO2, GOPRO2-IND, GOPRO4, MUVPRO2, MUVPRO4

PRO transmitters are only required on systems managed with Cloud Assistant.

Hands free: FREE T, FREE TH

Management software & programmer: CLOUD ASSISTANT, ASSISTANT

Wall transmitters: GO-BUTTONGO-SWITCHGO-PUSH2GO-KEYKEEPADKEEPUSH

Antennas: ANT868, FLAT868