Name: BASE-MINI Mini Receiver | JCM 868MHz 1 Channel RX Quantek
SKU: BASE-MINI
Price: 44.77 GBP
Availability: InStock

It’s small size makes it ideal for situations where space is an issue. Perfect for installation inside automatic door operators and for use with our hands free system.

High capacity of 500 transmitters.
1 channel.
High security rolling code transmission system, nominal range of 100 metres.
APS (approaching system), when a transmitter button is pressed it transmits its signal at regular intervals for 15 seconds, this enables the user to approach the gate without having to press the button again.
Remote programming:
- Additional transmitters can be programmed from already working ones without the need to access the receiver. (If not managed with Cloud Assistant).
- Or ensure total security by setting up and managing the receiver remotely with the Assistant programmer and Cloud Assistant software.

Compatibility:

Only compatible with JCM Technologies transmitters using Quantek coding
Compatible transmitters can be identified by a serial number on the back ending in 040

868.35MHz miniature receiver
Power supply: 12/24Vac/dc
Memory: 500 codes (transmitters). If using, the PCB can plug directly into the ASSISTANT programming and management tool
Coding method: High security rolling code
Relay contacts: 1 channel, normally open momentary relay contacts
Operating temperature: -20°C to +55°C
Protective plastic case
Program additional transmitters from already programmed ones, without having to access the receiver (except when managed with Assistant)
Dimensions: 65 x48 x 23mm

Only compatible with JCM Tech transmitters with Quantek coding (serial number on transmitter ending 040).

📄Manual

▶Programming

▶Resetting the memory

▪ Remotes won’t program

✅ Solution:

Check that the remotes are compatible. They must be Quantek coded remotes to work with this receiver. Check the serial numbers on the remotes. Click here for more information.
If the remotes are compatible, follow the programming video, or refer to the receiver manual.

If issue persists, power down the receiver and power it back up. If you hear 2 beeps, the receiver has an installer code.

Contact the original installer for new remotes.
Purchase another receiver and remotes without installer code and wire it in parallel.

▪ 7 beeps from the receiver when trying to program remotes

✅ Answer:

The memory is full. Please upgrade or add another receiver.
If some remotes have been lost or not in use, you can reset the receiver and re-program the ones still in use.

▪ The equipment the receiver is wired to (auto door controller, gate panel, etc) isn't activating when the remote is pressed

✅ Solution:

If the receiver relay is clicking and the red LED is turning on when the remote is pressed, the system is working properly. Check the wiring from the receiver to the equipment. Refer to the equipment manual or contact the manufacturer.
If the relay isn’t clicking, check the remote is compatible and is programmed.