Name: 2 Channel 868 Receiver | Remote Control for Gates & Barriers
SKU: BASE500/2
Price: 77.16 GBP
Availability: InStock

Long-range 2 channel 868 receiver designed to add secure remote control functionality to automated gates, barriers, rising bollards, garage doors, and similar systems.

2 channel operation for controlling multiple outputs
High capacity memory supporting up to 500 transmitters
High security rolling code transmission system
Nominal operating range of up to 100 metres

Key Features:

APS (Approaching System):
When a transmitter button is pressed, it continues transmitting at regular intervals for 15 seconds. This allows the user to approach the gate without needing to press the button again.
Remote Programming:
Additional transmitters can be programmed from an already working remote without needing direct access to the receiver (unless managed via software).
Advanced Management Options:
For enhanced security and control, the system can be configured and managed remotely using an Assistant programmer and Cloud Assistant software.

Compatibility:

Only compatible with JCM Technologies transmitters using Quantek coding
Compatible transmitters can be identified by a serial number on the back ending in 040

Ideal for installations requiring higher transmitter capacity, secure access control, and flexible remote management.

Power supply: 12 or 24V ac or dc
Power supply range: 9 to 35V dc, 8 to 27V ac
Power consumption: 60mA standby, 90mA operating
Frequency: 868.35 MHz
Memory: 500 codes (transmitters), removable memory card
Coding method: High security rolling code
Relay contacts: 2 channels, normally open momentary relay contacts, channel 2 relay has selectable momentary or bi-stable operation
Relay contact rating: 1A / 125V ac. dc
Dimensions: Enclosure 190 x 82 x 40mm, PCB 74 x 63 x 25mm
Operating temperature: -20°C to +85°C
Protection: IP65

Only compatible with JCM Tech transmitters with Quantek coding (serial number on transmitter ending 040).

📄Manual

▶Programming

▶Resetting the memory

▪ Remotes won’t program

✅ Solution:

Check that the remotes are compatible. They must be Quantek coded remotes to work with this receiver. Check the serial numbers on the remotes. Click here for more information.
If the remotes are compatible, follow the programming video, or refer to the receiver manual.

If issue persists, power down the receiver and power it back up. If you hear 2 beeps, the receiver has an installer code.

Contact the original installer for new remotes.
Purchase another receiver and remotes without installer code and wire it in parallel.

▪ 7 beeps from the receiver when trying to program remotes

✅ Answer:

The memory is full. Please upgrade or add another receiver.
If some remotes have been lost or not in use, you can reset the receiver and re-program the ones still in use.

▪ The equipment the receiver is wired to (auto door controller, gate panel, etc) isn't activating when the remote is pressed

✅ Solution:

If the receiver relay is clicking and the red LED is turning on when the remote is pressed, the system is working properly. Check the wiring from the receiver to the equipment. Refer to the equipment manual or contact the manufacturer.
If the relay isn’t clicking, check the remote is compatible and is programmed.